Haunting Your Yard!

I’m going to attempt to give a basic “how to” of the process of building our pillars for our graveyard fence. There are a lot of great ideas out there on the web - different ways to build pillars. Some which are made of foam and very lightweight. We would eventually like to redo ours.

First off, one of the biggest issues we have here in Colorado is the wind. We can get hurricane force gusts coming off of the mountains. This makes prop building more difficult as we always have to think in terms of worst case winds and build things and set up things in the graveyard with that always in mind. We don’t want our props to end up in Kansas!

The year we built them we were also on a tight budget. Well, we are always on a tight budget. If we didn’t watch ourselves we could easily spend hundreds of dollars each year on Halloween. That year a lot of new houses were going up close by - and dumpster diving was how we got much of our materials. If you shouldhappen to use that method of acquiring materials be careful to ONLY get materials that are IN a dumpster. Otherwise it is not free game - even if it’s sitting next to the dumpster.

So we worked with what we had - which was a lot of framing material. Some of which was perfect for building our pillars.

We built 2 tall, main entrance pillars and 4 shorter pillars. What helps the pillars stay upright being that they are so tall, is a couple of things. First, since they are attached to other pillars via the fencing, they are not stand alone. We also stake them with metal stakes to give them a little extra stability.

As far as fencing goes - we did not make it. There are some techniques out there that use pvc pipe to make some pretty realistic fencing. We decided to go with real rod iron. We were able to get pieces similar enough from a local recycling place. So storage and hauling them around can be quite difficult, but they are sturdy. One of the problems we have had is that up until this year, the elementary bus stop was in front of our house. The kids loved looking at our setup while waiting for the bus, but they had a tendency to “hang” on the fencing. Which is why we chose something more stable, and the pieces of fencing are screwed into the sides of the pillars.

To finish the pillars we did some basic painting. One great way to get large amounts of paint is to see what colors they have at the local home improvement store in the “oops paint” section. You’ll save a lot of money. We did not learn that until after using spray paint on these which is very expensive. We did gray first, then did touches of black and a greenish paint to give them a different look.

Since then, this past year, I redid the pillars. I did a different paint job in which I put black paint in a line, spray it with water, then do a drag with a paint brush. It gives things an older look (I use the same technique on our tombstones and on the mausoleum). This is an example of how they looked this year. They are not quite as dark overall but look so much better at night. I also added moss.

Now back to the original year we first built them. I have mentioned that we build most of what you see. There are some exceptions. We do buy inexpensive Halloween decor at local stores and usually modify them. So these skulls in a cage we got at Big Lots one year. I have since added moss to these as well. These hang from the two tall entrance pillars. It is the small details that make the prop in my opinion. The crosses you see on the front of the pillars were also purchased at Big Lots and have also had moss added to them to give an old feeling.

No matter how well you construct your props they will need touching up and repair just about every year. Moss is a great way to hide flaws and things that happen in general while being moved around and stored. Keep bags of it on hand - it comes in very handy.

So that’s pretty much how we built our graveyard fence. I will say, the rod iron does add an extremely realistic touch. If you have a way to get a hold of some and a way to store it, I would really consider it. Each year we seem to do a little something more to add to them, which is always part of the prop process!